We laser-scan the building as it stands today and draft it in CAD or Revit, so your renovation, fit-out or addition starts from measurements you can trust instead of old plans and a tape measure. Serving the GTA, Kitchener-Waterloo and projects across Canada and the USA.
An as-built drawing records a building exactly as it was built and as it stands now: wall positions, door and window openings, ceiling heights, columns, stairs, and all the changes nobody wrote down. After years of renovations, tenant fit-outs and field changes, the original design drawings rarely match reality.
Instead of measuring room by room with a tape and a laser distance meter, we capture the whole space with a 3D laser scanner. The scanner records millions of measured points (a point cloud), and our CAD technicians draft your drawings directly from that data with survey-grade accuracy.
Start design from a measured base instead of re-tracing an old PDF. Drawings arrive in DWG or RVT, ready to draft over.
Check clearances, locate columns and plan duct and pipe routes against real geometry before you issue drawings.
Price work from real dimensions, record what was actually built, and give facilities teams drawings that match the building.
One site visit. No coming back to re-measure the room someone missed.
We set up a 3D laser scanner at positions throughout the building and capture every room, corridor and ceiling. Most properties take 1 to 4 hours on site.
The scans are joined into one point cloud and checked. Our CAD technicians then draft your floor plans and any agreed views directly from the measured points.
You receive DWG, PDF and/or RVT files, usually within 3 to 5 business days, plus the point cloud on request.
Every building is different, so we quote each project. These are the factors that move the price:
Send the address, rough square footage and what you need it for. We'll reply with a quote within 24 hours.